UF Water Treatment Machine Reverse Osmosis Water Plant Pure Filter

• Customization: Available
• Certification: ISO9001, CE
• Salt Rejection Rate: 98.0%
• Application: Industry
• Capacity: 10t/H
• Motive Force: Electric Power
• Type: Hollow Fiber Ultrafiltration (UF)
• Usage: Environmental Protection, Printing and Dyeing Fact
• Place of Origin: Guangdong China (Mainland)
• Brand Name: Chunke
• Materies: Stainless Steel
• Productivity: 50t/H
• Weight: 2000kg
• Power: 5kw
• Size: 40cbm
• Valve: Automatic
• UF Membrane: Chunke
• Material: Stainless Steel/FRP
• Transport Package: Wooden Case or Film
• Specification: CE
• Trademark: CHUNKE
• Origin: Guangdong, China (Mainland)
• HS Code: 8421219990
• Production Capacity: 100sets Per Year

Product Description

UF water treatment machine reverse osmosis water plant pure filter

Ultrafiltration water treatment equipment is a process driven by pressure Through the micropore screening on the membrane surface particles and impurities with a diameter of0.002-0.1μm can be intercepted,which can effectively remove colloids,silicon, proteins,and microorganisms in the water.And organic matter. When the liquid mixture flows through the surface of the membrane under a certain pressure the solvent and small molecular substances penetrate the membrane and are trapped,thereby achieving size and inter molecular separation and purification. It can be widely used in the separation concentration and purification of substances.The process has no phase transformation no heating, normal temperature operation,energy saving and particularly suitable for the separation of heat-sensitive substances.The ultrafiltration process is simple,with few supporting devices,simple operation and low maintenance cost.Resistant to chemical erosion wide range of PH adaptability, largest membrane area per unit volume, lowest investment cost, simple cleaning.
THE ATTACK COMPONENTADOPTS ULTRAFILTRATION MEMBRANE.WITH SUCH THE FOLLOWING ADVANTAGES:
1. The membrane material is modified PVC which is resistant to pollution and hydrophilic.
2.  The flux is lasting and stable, and the anti-pollution ability is strong.
3.  It can withstand 200ppm environment for a short time,and the applicable pH range is 2-13.
4. Complete sterilization, and the water production is less than 0.1NTU
5.  With cross-flow design, eliminate dirty blockage and increase life span
6. Within SD115<1 (the test value when the turbidity of raw water is less than 20NTU) of agricultural product water:1000~100000
7. Working temperature≤45ºC
8. Working pressure ≤0.5Mpa
9. Feeding liquid:80%

How Do I Know Which Size Unit to Buy?
General guidelines for modeling an RO system to take into consideration are the silt density index (SDI) measurement of the feed water after pretreatment. Derived from experience, limits on permeate flux and element recovery for different types of waters are based on correlation of the SDI value with membrane fouling and mineral content with element recovery, respectfully, for different types of waters. These general limits shown in Table 1 below serve as boundary conditions when designing a RO system. A system designed with high permeate flux rates for example is likely to experience  higher fouling rates and more frequent chemical cleanings.  Due to high salinity (>36,000 ppm TDS), seawater system designs are further limited by the osmotic pressure and durability of the membrane elements.


 

Company Information
Guangzhou Chunke Evironmental Technology Co., Ltd. was establish in 2009. Company address is Junhe Stress,Baiyun District,Guangzhou.Adjacent to Guangzhou Baiyun International Airport, an independent mechanical processing, production, commissioning, testing, packaging workshop and spacious office building, with a total area of over 6,000 square meters.
We are specialized in sea water desalination,salt water desalination ,drinking water system ,reverse osmosis equipment,EDI electric desalination system,sea water desalination system,water treatment spares.Our products have been sold all over 40 country in the world.We have passed the certification to the ISO9001 international quality system and CE certification of EU.We are member of the American Water Quality Association.
After years of development, the company production equipment, advanced management, a blend of water treatment and filling technology in a number of high-tech talent, in the machinery manufacturing, filtration technology, automation control, project management, bottled water plant planning A field to reach the international advanced level.


By always adhering to the quality and service tenet of"insisting on scientific innovation,bring forward brand strategy,providing high quality products and implementing frist class service".,We are welcoming friends from all circles to visit and instruct us of sincere cooperation and mutual brilliance with best quality and first-class service.

FAQ

Q: Are you trading company or manufacturer ?
A: Yes, we are a manufacture with designing, manufacturing, marketing and exporting.
Q: What's the information you need to know before order?
A: what's your raw water ? 
B: what's the capacity per hour of the equipment ? 
C: What's the application of purifier water  ? 
Q:Which machine should I choose?
A:It depends on your raw water quality ,pure water requirement and the water production you need
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 40% T/T in advance ,60% TT balance before shipment.
Q: How long is your delivery time?
A: Generally it is 15-30 days, Depends on your project.
Q:How can you control the quality and delivery?
A:All our machines will be tested before packaging. wooden packing is strong and safety for long delivery.
Q:What's your warranty?
A:Our warranty is 1 year. But normally, our machine can work 5 years before repair.