Carbon Filter System Reverse Osmosis Water Treatment Equipment

• Certification: CE
• Salt Rejection Rate: 97%-99%
• Application: Industry
• Capacity: 2t/H
• Motive Force: Electric Power
• Type: Reverse Osmosis
• Usage: Environmental Protection, Chemical Industry
• Place of Origin: Guangdong China (Mainland)
• Brand Name: Chunke
• Materies: Stainless Steel
• Color: Silver
• Productivity: 1t/H-5t/H
• Transport Package: Wooden Case or Carton Box
• Specification: CE
• Trademark: CHKE
• Origin: Guangdong, China (Mainland)
• HS Code: 8421219990
• Production Capacity: 1000sets Per Year

Product Description

Carbon Filter System Reverse osmosis water treatment equipment 

Process: Raw water pump - Sand filter - Carbon filter - water softener - Scale inhibition dosing system-Cartridge filter - High pressure pump-RO membrane host-UV Sterilizer-Ozone generator series

RO Water Treatment Plant Advantages:

The multi-media water filter systems operate for much longer periods of time (five or more times as long at the same filtration rate) before backwashing is necessary because the bed can hold more turbidity. Turbidity is trapped and held throughout the entire bed depth, rather than the top one or two inches.

Multi-media filtration is much better suited for use in a closed pressure tank since cracking of the bed, and subsequent breakthrough of turbidity is virtually eliminated and the need for visual inspection is unnecessary. The use of pressure tanks (rather than open basins or filters) is an obvious advantage for point-of-use filtration and could also be of real importance in the filtration of small community water supplies. More rapid filtration flow rates in multi-media filtration allow the use of smaller diameter tanks with equal or better results. A very high degree of clarity is achieved in the filtered water because of the fact that the finer particles of garnet at the bottom trap finer turbidity particles.

Another important advantage is that multi-media water filters can clarify water at a much higher flow rate than a single-media sand filter. This is 14 to 15 gpm per square foot of bed area, as compared to 2 gpm per square foot of bed area. This is a very important difference in the production of filtered water.

Main Technical Parameters:

Model	Flow rate (L/h)	Power(KW)	Water use efficiency	RO membrane	Dimension  L X W X H(mm)
RO-500L	500	1.5	≥ 50%	4040	1650X630X1800
RO-750L	750	2.5	≥ 50%	4040	1870X630X1850
RO-1000L	1000	2.5	≥ 50%	4040	1870X650X1850
RO-2000L	2000	3.5	≥ 50%	4040	2440X650X1750
RO-3000L	3000	4	≥ 50%	4040	2440X620X1850
RO-5000L	5000	7.5	≥ 50%	8040	2000X900X1800
RO-6000L	6000	9.5	≥ 60%	8040	3000X900X1800
RO-8000L	8000	13.5	≥ 60%	8040	3000×900×1800
RO-9000L	9000	14	≥ 60%	8040	4000X900X1800
RO-10T	10T/H	19	≥ 60%	8040	3000X900X1800
RO-12T	12T/H	19.5	≥ 60%	8040	4000X900X1800
RO-15T	15T/H	23	≥ 60%	8040	4000X900X1950
RO-20T	20T/H	28	≥ 60%	8040	5000X900X1950
RO-30T	30T/H	55	≥ 60%	8040	7000X900X1950

Flow Chart Of  RO Water Treatment Machine

Raw water pump - Sand filter - Carbon filter -Cartridge filter - High pressure pump- RO membrane host-RO Cleaning system

1. Raw water supply pump: To use CNP
2. High-pressure pump: To use CNP
3. Reverse Osmosis Membrane: To use DOW, China
4. Pre-treatment device: To use PVC tank with manual valve
5. Conduit: To use PVC
6. Electric standard configuration: PLC automatically control
7. Electrical components: To use Zhengtai's and Schneider's products
8. Frame: To use stainless steel.

 

4 Reverse Osmosis Modules( RO)
RO system is key part for the water treatment system, which is widely used to make the pure water and drinking water. RO membrane removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solute such as iron, Virus, bacteria and solids is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side.

5 Piping, Valves & Fittings
The pipe, valves and fittings (including tubing) ball valves, butterfly valves, piping used to the system is SS304. Reverse Osmosis Modules is equipped with sample valve for the convenience to check the product water.

6 Control devices
The whole automatic production line is achieved through the converter and PLC programmer and data collector such as the liquid lever sensor, flow sensor and etc. The whole production line is monitored by remote computer. When the water level of the product water tank is high, the system will stop automatically. When the water level of the product water tank is low, the system will run automatically.

Advantages of RO systems:

Running stablely, high desalination and recovery rate.

Easy to operate and small maintenance workload

Compact structure and saves installation place.

Highly efficient and low energy consumption

No secondary pollution and low operation cost

Applications for RO plants:

• Homes and villas 
• Hotels/hospitals 
• Commercial complexes 
• Kindney dialysis Unit 
• Poultry farms 
• Food and beverages industry 
• Bottled water plants 
• Cooling tower /boiler feed water

Welcome to contact to us for quotation !