| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 98.5% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
RO Water plant is Good or not ?
1, RO reverse osmosis water purifier accuracy is very high, the accuracy of good reverse osmosis is about 0.0001 microns, basically what
bacteria and viruses can be filtered.
2, RO reverse osmosis water purifier is very dependent on the reverse osmosis membrane. This is divided into two parts: (1): RO membrane
go to bacteria and viruses, but the RO membrane itself has an odor. In order to improve the taste of the drink, the activated carbon filter will be
added. The problem is mainly on the activated carbon filter. Old RO, the last activated carbon rod is T33 or similar carbon-carbon filter. The
domestic water purification industry environment, the cost of this filter is not high, rarely more than 20 yuan cost, then this cost will not be
qualified of. The production process of granular carbon itself is carried by bacteria. The RO membrane is free of bacteria. After the activated
carbon, the bacteria are taken up and put into the pressure tank. After a long time, the bacteria multiply and there is green hair in the pressure
tank. Some imported RO, the post-activated activated carbon is high-temperature sintering of powdered carbon, can try to avoid bacterial
problems, of course, this cost, the domestic clean water environment is mostly unacceptable.
(2) It is the working characteristic of the RO membrane, in addition to pressure penetration and precipitation. RO is also called reverse osmosis.
The principle of permeation is to move from low concentration to high concentration. Pressurizing high-concentration water through RO
membrane to achieve high concentration to low concentration is reverse osmosis. In theory, if it is completely reverse osmosis filtration, the TDS
is zero. But why not 0, because there is still analysis, penetration, water production is the pump start, pressurization work. When there is no
water, there is still water in the pipeline. The two ends of the RO membrane will penetrate to a high concentration, and this equilibrium process
will exchange harmful substances, including some bacteria. Of course, RO filtration can't achieve theoretical 100% filtering. Bacteria also eat
RO membranes, and the RO membrane will also have a reduced effect over time. The RO machine with pump, the pipeline pressure is
buffered, the concentrated water characteristics will be better; the machine without pumping pressure, the characteristic of concentrated water
is more obvious, which is why the machine without pump is pressurized, the TDS is higher than the tank Some, whether the imported model has
the pump to see the last symbol on the line, generally XXXXXP, this P means there is a pump. That is to say, the RO machine must completely
filter bacteria and other pollutants. The quality of the RO membrane is very important. Moreover, the activated carbon behind it must also be
imported high-quality activated carbon.
| Product Name: | RO Water System Machine RO Water Plant Price With High-Pressure Pump | Frame Material: | FRP |
|---|---|---|---|
| Pretreatment: | Activated Carbon | MOQ: | 1pc |
| Certification: | CE | Recovery Rate: | ≥60% |
| Organic Removal Rate:: | ≥99% | Capacity: | 0.1T-100T Per Hour |
| Warranty: | 365 Days | Application: | Drinking |
| Feed Source | Top Water |
Well Water |
Surface Water | Brackish Water |
|
| Feed SDI | <3 | <3 | <5 | <5 | |
| Max Element Recovery (%) | 19 | 17 | 15 | 13 | |
| Average System Flux (gfd) | 20 | 17 | 13 | 10 | |
| Max Feed Flow Rate per Element (gpm) | 2.5" Diameter | 6 | 6 | 6 | 6 |
| Max Feed Flow Rate per Element (gpm) | 4" Diameter | 14 | 14 | 14 | 14 |
| Max Feed Flow Rate per Element (gpm) | 8" Diameter | 75 | 70 | 55 | 60 |
| Min Concantrate Flow Rate per Element (gpm) | 2.5" Diameter | 1 | 1 | 1 | 1 |
| Min Concantrate Flow Rate per Element (gpm) | 4" Diameter | 3 | 3 | 3 | 3 |
| Min Concantrate Flow Rate per Element (gpm) | 8" Diameter | 14 | 14 | 14 | 14 |
This system is designed as regards to customer raw water test report and application.
Pumps:
CHUNKE is using CNP pump for high pressure pumps and raw water pump. We are using SEKO
pump for chemical dosing. As regards to customer budget, customer can choose one brand from them.
Sand Filter Tank:
We are giving three option to you for sand filter tank; FRP, Stainless Steel S304 and Stainless Steel 316. For food and pharmaceutical industry we suggest SS316, of course the raw water source is also is important to choose tank material. To choose correct tank, we have to check every data of your application and then suggest to you most appropriate solution.
CHUNKE has all kind of sand media at its stock. Commonly customers are using 1-2mm,2-4mm, 4-8mm,8-16mm size Quartz Sand.
If you want to use FRP tank, the tank size is Ф1500 x 24000mm, our code for this tank is CK-6096. Flow rate is 40-60 m3/h and you can put 3750kg sand inside.
If you want to use Stainless Steel 304 or 316 tank the tank size is Ф1500 x 2400mm, our code for this tank is
CK1-6096. Flow rate is 40-60 m3/h and you can put 3750kg sand inside.But we do not suggest use SS tank, FRP
is better for Brackish Water.
Carbon Filter Tank:
Carbon filter is same with sand filter,tank material will be decided by you and our engineering team as FRP orstainless Steel 304 or 316. But we do not suggest use SS tank, FRP is better for Brackish Water.
If you want to use FRP tank, the tank size is Ф1500 x 2400mm, our code for this tank is CK-60.96 Flow rate is 40-60m3/h and you can put 1250kg activated carbon inside.
If you want to use Stainless Steel 304 or 316 tank the tank size is Ф1500x 2400mm, our code for this tank is CK1-6096. Flow rate is 40-60 m3/h and you can put 1250kg activated carbon inside.
Water Softener (Resin) Tank:
If you raw water has hardness, you can choose CHUNKE water softener tank in your system, size is same with sand and carbon filter. You can choose material as FRP or Stainless Steel. You can put 2500L resin in CK-6096 type FRP tank.
Cartridge Filter Housing & Cartridge:
All our Reverse Osmosis Water Treatment Machine has cartridge filter housing before membrane, membranes are most important and expensive parts of system. Therefore we have to protect them, cartridge filter housing material is SS304 or SS316. We mostly using 5micron or 1 micron PP cartridge. For 15000LPH 40" 15 pieces cartridges are enough.
Our Stainless Steel Cartridge Housing code is CK40-15core×40", its diameter is 230mm, it has 15 core (you can put 15 cartridges), cartridge height is 40" and all universal cartridge is suitable to use in our housing.
We suggest you to change cartridges in every month.
Membrane Housing:
At CHUNKE we are using stainless steel or FRP (ceramic) type membrane housing. It is depend on design and application.For 15000LPH machine, we have to use 8040 type membrane so as regards to membrane size , we offer you FRP type 8040 size housing. Membrane housing type is 8040 and 4 pcs.
Membrane:
The most important part of RO Water Treatment Machine is membrane, in market there are a lot of membrane available.
As regards to customer application and budget, our team offer from Vontron/GE/DOW/TORAY brands. Our company do not use no name membranes or low quality membranes.
For 15000LPH , you can choose one brand from below;type of the membrane is 8040 (16 pcs).
Toray
GE
DOW
Vontron
Standard export wooden plywood and carton packaging
Foreign installation and training
1.Timely Delivery,considerate sales after service
2.Many Years quality warranty,OEM service.
3.Top Craftmanship, All products 100% tested
4.Preferential freight by Famous shipping company
5.New Design,Very popular style products recommendation for your local market.
FAQ
Q: Are you trading company or manufacturer ?
A: Yes, we are a manufacture with designing, manufacturing, marketing and exporting.We have experience over 20 years.Our plant is 3000m³.
Q: What's the information you need to know before order?
A: what's your raw water ?
B: what's the capacity per hour of the equipment ?
C: What's the application of purifier water ?
Q:Which machine should I choose?
A:It depends on your raw water quality and your requirements.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 40% T/T in advance ,balance before shippment.
Q: How long is your delivery time?
A: Generally it is 15-30 days, Depends on your project.
Q:How can you control the quality and delivery?
A:Production strictly according to CE / ISO standards.
B:All our machines will be tested before packaging. wooden packaing is strong and safety for long delivery.
Q:What's your warranty?
A:Our warranty is 1 year. But normally, our machine can work 5 years before repair.
){kind=link}