Water Resue Big Project 50tph UF Ultrafiltration Water System Purification Filter Treatment

• Customization: Available
• Certification: ISO9001, RoHS, CE
• Salt Rejection Rate: Clean
• Application: Industry
• Capacity: 50t/H
• Function: Water Purification
• Frame Structure: Stainless Steel 304/316
• RO Membrane Brand: Vontron
• Water Pump: Cnp or Other
• Valve: Automatic or Manual
• Desalination: 97%
• Recovery Rate: 60-75%
• Productivity: 50000L/H
• Transport Package: Packed in Carton Case
• Specification: CK-RO-50T
• Trademark: CHUNKE
• Origin: Guangdong, China (Mainland)
• HS Code: 8421999000
• Production Capacity: 1000 PCS Per Year

Product Description

Water resue big project 50TPH UF ultrafiltration water system purification filter treatment

Ultrafiltration membrane system or ultrafiltration water purification plant is pressure driven process, it removes particles, suspended or particulate matter from water. Ultrafiltration membrane system can be used most effectively instead of pretreatment unit like sand, activated carbon mechanical filtration.

 

UF membrane permeability is more than reverse osmosis membranes. The most important things about Ultrafiltration water purification plant, if you use just Ultrafiltration membrane system, your raw water TDS can not be removed using MF and UF due to lower size.

Product Show :
UF with a nominal pore size of around 0.02 μm is found to be the most effective in eliminating potential elements such as microorganism, silt, algae, and large molecular weight from the feed water source that are responsible for RO membrane fouling. Most of application ultrafiltration water purification plants are used as pretreatment for RO system. 
THE ATTACK COMPONENTADOPTS ULTRAFILTRATION MEMBRANE.WITH SUCH THE FOLLOWING ADVANTAGES:
1. The membrane material is modified PVC which is resistant to pollution and hydrophilic.
2.  The flux is lasting and stable, and the anti-pollution ability is strong.
3.  It can withstand 200ppm environment for a short time,and the applicable pH range is 2-13.
4. Complete sterilization, and the water production is less than 0.1NTU
5.  With cross-flow design, eliminate dirty blockage and increase life span
6. Within SD115<1 (the test value when the turbidity of raw water is less than 20NTU) of agricultural product water:1000~100000
7. Working temperature≤45ºC
8. Working pressure ≤0.5Mpa
9. Feeding liquid:80%

Ultrafiltration membrane system fall between that of nanofiltration and micro filtration with a pore size range between 10 to 100 nm, or about 500 to 500,000 Dalton in molecular weight. UF membranes typically operate between 3 - 5 bar, of course, in some special cases to 8 bar and are dependent on trans membrane pressure to drive the separation process. You can see seperation size and molecular for Ultrafiltration Water Purification Plant from below table.

How Do I Know Which Size Unit to Buy?
General guidelines for modeling an RO system to take into consideration are the silt density index (SDI) measurement of the feed water after pretreatment. Derived from experience, limits on permeate flux and element recovery for different types of waters are based on correlation of the SDI value with membrane fouling and mineral content with element recovery, respectfully, for different types of waters. These general limits shown in Table 1 below serve as boundary conditions when designing a RO system. A system designed with high permeate flux rates for example is likely to experience  higher fouling rates and more frequent chemical cleanings.  Due to high salinity (>36,000 ppm TDS), seawater system designs are further limited by the osmotic pressure and durability of the membrane elements.

What should i prepare when i need a quote ?
Raw water condition: Water Quality Analysis Report / TDS
Raw water source: Tap water, groundwater, seawater, or river water etc.
What does water use for: Drinking water, domestic water, breeding, irrigation, printing and dyeing, medicine, cosmetics, etc.
Quantity: How many do you need for water treatment machine
Basic project: Water yield, material, quantity, operation mode, power supply voltage, etc.

 

>>cotact us to get more detail and information<<
 

 

FAQ
Q: Are you trading company or manufacturer ?
A: Yes, we are a manufacture with designing, manufacturing, marketing and exporting.
Q: What's the information you need to know before order?
A: what's your raw water ?
B: what's the capacity per hour of the equipment ?
C: What's the application of purifier water ?
Q:Which machine should I choose?
A:It depends on your raw water quality ,pure water requirement and the water production you need
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 40% T/T in advance ,60% TTbalance before shipment.
Q: How long is your delivery time?
A: Generally it is 15-30 days, Depends on your project.
Q:How can you control the quality and delivery?
A:All our machines will be tested before packaging. wooden packing is strong and safety for long delivery.
Q:What's your warranty?
A:Our warranty is 1 year. But normally, our machine can work 5 years before repair.