| Customization: | Available |
|---|---|
| Certification: | ISO9001, RoHS, CE |
| Salt Rejection Rate: | Clean |
|
Still deciding? Get samples of US$ 3000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
6TRO &15T UF Water Filtration Systems water reuse UF Water Purification Systems
This system consists of booster pump, FRP/Carbon Steel pretreatment tanks (sand filter, activated carbon filter), SS304 cartridge filter housing, chemical dosing systems, high pressure pump, FRP membrane pressure vessel, 4040 or 8040 membranes, and optional UF membranes, control panel and touch screen control.
Material and parts brand can be changes as regards to raw water quality and customer demand.
From touch screen panel, you can see all system flow diagram and automatic or manual control the system.
Membranes do not allow small particles, virus, bacteria to pass as a result your water becomes very clean and safe.
Irrigation RO & UF Water Filtration Systems are started from booster pump, it feeds raw water to pretreatment tanks. Depends on capacity pretreatment tank size and numbers can be changed. Because of High TDS (Total Dissolved Solid) we usually use FRP and Carbon Steel Tanks but we can check your raw water source analysis and we can suggest alternative material. If salt content and TDS high, because of the corrosion, we are using FRP or Carbon Steel material for pretreatment tanks.
| Equipment part | Introduction | |||||
| Reverse Osmosis Membrane Unit | Including reverse osmosis membrane, membrane shell and scaffold | |||||
| Pretreatment System | Including filter, activated carbon filter, particle filter, etc | |||||
| High-Pressure Pump | Provide enough pressure to push the water through the reverse osmosis membrane | |||||
| Control System | Monitor and control the operating parameters of reverse osmosis system | |||||
| Storage Tank | Store the treated water | |||||
| Membrane Cleaning System | For regular cleaning of reverse osmosis membrane to maintain performance | |||||
| Concentrate Recovery System | Used to recover concentrated water and improve system efficiency | |||||
| Automation System | Realize the remote monitoring and automatic control of the system | |||||
| Acid and Alkali Supply System | Used for membrane cleaning and PH adjustment of reverse osmosis membranes | |||||
| Ion Exchange Unit | Used to remove ions from water and dissolve salts | |||||
| Hardness Adjustment System | Used to regulate the hardness of water | |||||
| Pressure Gauges and Flow Meters | Monitor system pressure and water flow | |||||
Membranes, in industrial Brackish Water Desalination Plant, are most important part. They block if parts size bigger than 0.001µm and molecular weight up to 150-250Dalton. It consists of impurities, particles, sugars, proteins, bacteria, dyes, organic and inorganic solids.
Also, Brackish Water Treatment Plant system can have chemical dosing at pretreatment or post treatment, like antiscaling (antiscalant), antifouling, pH adjustment, Sterilization & Disinfection chemicals.
In Chunke when we check customer water analysis report, sometimes because of scaling and fouling problems, we can use CIP (Clean in Place) System, it washes membrane in membrane housing and make membrane life longer. CIP cleaning system is good choice for water technologies and solutions.
Electrical Power of Industrial Filtration Plant for Irrigation
For industrial Brackish Water Treatment Plant needs 220-380V/50Hz/60Hz. For bigger capacity, because of high pressure pump, it needs 380V 50/60Hz. As regards to your Brackish Water RO Plant machine design, we will check your electrical supply and decide fix power to you. Chunke as water treatment solutions company can also help you to customize pump power supply.
){kind=link}